Do It Yourself Digital Digicam Restore: 09 06

From McJobs Wiki
Jump to navigation Jump to search

For all others, Safe Oh No! Your favourite compact flash digicam abruptly has began giving you CF memory card errors. You've tried a number of different memory playing cards, and it is still the same thing. Your digicam is inoperative as a consequence of this error. Don't fret, you simply could be able to repair this downside yourself. Have a look inside your digicam's CF card slot. It is very likely that you'll have a bent pin in there. In that case, take away batteries and card. Use a small/skinny jeweler's flat screwdriver to bend the pin again as shut as attainable. The jeweler's screwdrivers that you just see on the dollar store will work nice. One other instrument that I typically use is a stiff wire with a bent hook on the top to get very flattened pins began. Take your time and use as much patience as you'll be able to muster (take a breather in between if wanted). Simply keep nudging it upward/straighter a "tiny bit at a time". Whatever you do, do not try to unbend it with one push/nudge, you will not be capable to do it. It doesn't have to be good, simply as shut as you may get it. When it is the best that you can get it, take your flash card and "SLOWLY" insert it. The card itself should positive-align the pin. Remove the card, and verify that the pin is still straightened. If so, reinsert the card and take a look at it out.